- Model: PD18G 48V to 12V
- RJ45 female input
- RJ45 male and male DC jack 5.5 x 2.1mm output
- 10 / 100Mbps data transfer rate
- 205mm wire length
- Plug and play and 82 x 28 x 23.5mm size
- Model: WI-POE11S-48V
- 1 × 100Mbps PoE input port
- Supports IEEE 802.3af/at PoE standards
- DC Output: 12V 2A
- Maximum 30W PoE power input
- Separates power and data from Ethernet cable
- Plug-and-play installation
- Model: PSA15M-300 (SM)
- Input Voltage: AC 100-240 V
- Output Voltage +30VDC (±5%)
- Support for 10/100MBs Ethernet Network ports
- Model:BN060-P12024
- Output Voltage: 24VDC @ 0.5A
- Rated Voltage: 100-240VAC @ 50/60Hz
- Efficiency: 75+%
- Switching Frequency: 50 kHz
- Model: PSA15M-300(AP)
- Input Voltage: AC 100-240 V
- Output Voltage +30VDC (±5%)
- Support for Gigabit Ethernet 10/100/1000 MB/s network ports
- Passive PoE standard (7/8pin +30V, 4/5 Ground)
- Surge, peak pulse, and overcurrent protection
- AC cable with Earth ground
- LED indicator for status monitoring
- Output voltage: 48V DC @ 0.32A
- Model :RG-POE-AF15
- Output: 52V DC @ 0.3A (15.6W total output) 1 x 1000Base-T port
- Input Voltage: 100–240V AC, 50/60Hz
- Warranty : 3 Years
- Rated Voltage: 100-240VAC @ 50/60Hz
- Output Voltage: 48VDC @ 0.5A
- Efficiency: 80+%
- AC Connector: IEC-320 C6
- Output Voltage: 24VDC @ 0.5A
- Rated Voltage: 100-240VAC @ 50/60Hz
- Efficiency: 75+%
- Switching Frequency: 50 kHz
- Output Voltage: 24V-1.0A
- POE Injector 24W AirFiberX For BaseStation Radios
- Gigabit LAN Port: Yes
- Remote Reset Capability: Yes
- Model: RG-POE-AT30
- Output: 52V DC @ 0.3A (up to 30W output) 1 x 1000Base-T port
- Input Voltage: 100–240V AC, 50/60Hz
- Warranty : 3 Years
- Output voltage: 48V DC @ 0.65A
- Efficiency: 87%
- Switching frequency: 70 kHz max.
- AC connector: IEC-320 C6
PoE Injector/Adapter – Reliable Power Over Ethernet for Seamless Connectivity
Maximize your network efficiency with our PoE Injector/Adapter, designed to deliver both power and data over a single Ethernet cable. Ideal for IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices, this compact, easy-to-install device reduces cable clutter and simplifies setup.
Key Features:
-
IEEE 802.3af/at Compatibility: Supports PoE (Power over Ethernet) for efficient power delivery.
-
Wide Voltage Input: 100-240V AC for global compatibility.
-
Versatile Output Power: Available in 15.4W (PoE) and 30W (PoE+) options to meet various device needs.
-
Plug & Play Installation: Simple, no-software-required setup for quick deployment.
-
Enhanced Protection: Over-voltage, over-current, and short-circuit protection for safe operation.
Perfect for home networks, office setups, and surveillance systems, our PoE Injector/Adapter is the reliable, cost-effective solution to power your network devices without the hassle of additional cables.
PoE Injector/Adapter